|
Home Nach oben
| |
Stela Laxhuber offers drying systems which are successful used in a lot of
application fields. Our belt driers are equipped with the external air
technology which guarantees an optimized drying process.
| |
STELA Laxhuber GmbH
Öttingerstr. 2
D-84323 Massing
Tel.: +49 (0)8724/899-0
Fax: +49 (0)8724/899-80
E-Mail: sales@stela.de
www.stela.de
|
|
|
|
 |
|
|
| |
belt drier – drying systems |
|
|
|
|
|
|
|
|
|
With the design "external air technology", the fans and air heaters are installed outside the drier tunnel. The drier belt is accessible from both sides.
The STELA circulating air system allows to adjust in every drying zone a temperature and humidity adapted to the requirements of the drying
process.
|
 |
|
|
|
|
internal air technology "Power Pack"
|
|
|
|
|
|
|
With the design "internal air technology", the fans and air heaters are installed laterally at the drier tunnel in so-called "power packs".
|
 |
|
|
|
|
|
|
|
|
|
|
Alternating ventilation of the product in the successive zones.
|
 |
|
|
|
|
two-belt drier with cooling zone
|
|
|
|
|
|
|
Pre-drying and main drying are carried out on the first belt, the final drying in the first section of the second belt. The last belt section is designed as cooling zone.
|
 |
|
|
|
|
|
|
|
|
|
|
High drying capacities are achieved on small base areas. The moisture in products with a long retention time is distributed
especially homogeneous because of the multiple mixing when the product is delivered onto the following belts. The speed of every separate belt is infinitely variable by frequency converter.
Thus the drier can be adjusted optimally to the product to be dried.
|
 |
|
|
|
 |
|
|
|